M.2 2242 PCIe Gen3 x4
M.2 2242 module on PCIe Gen3 x4 with NVMe protocol support. Available configurations include 128 GB–512 GB on PCIe Gen3 x4.
Technical Summary
Key Features
- NVMe 1.4 protocol over PCIe Gen3 x4
- M.2 2242 form factor, 22 × 42 × 2.2 mm
- 3.3 V supply voltage
- MTBF of 1,500,000 hours
- Storage temperature -40 °C to 85 °C
- IQC, IPQC, FQC and OQC production quality control
Ordering Information
Industrial Ordering Part Numbers
| Ordering P/N | Capacity | Interface | Datasheet |
|---|---|---|---|
| SMC128GM24310 | 128 GB | PCIe Gen3 x4 | On Request → |
Part numbers for capacities not listed are available on request.
Performance & Endurance
The speeds shown above are the highest sequential read and write values in this product family. Performance and endurance are listed for each capacity with published datasheet values.
| Capacity | Sequential read | Sequential write | TBW |
|---|---|---|---|
| 128 GB | 1800 MB/s | 1500 MB/s | 75 TB |
Mechanical Specifications
Environmental Specifications
Compatibility & Qualification
Drive selection is determined by the available bay or socket, the host interface and the board layout. Compatibility verification is performed against the applicable target configuration according to project requirements.
Industrial Program Controls
Production Verification
Production-level verification
- Incoming, in-process, final and outgoing quality control
- Firmware version verification before shipment
- Drive functional verification before shipment
Project-level qualification
- Target-platform compatibility verification
- Stability verification under the defined operating conditions
- Application-specific qualification where the program requires it
Production-level verification is part of the manufacturing flow. Project-level qualification is scoped per program.
Technical Documentation
Product Configuration Review
Provide the target platform, the required capacity, the host interface, operating conditions and expected program lifecycle. SIMORCHIP engineering will review the applicable drive configuration and qualification requirements.